- hochauflösender 2-Weg-Studiomonitor mit ''Air Motion''-Bändchenhochtöner
- blaue Frontblende lässt sich je nach Geschmack gegen beiliegende schwarze Alternativblende tauschen
- 8''-Tieftöner mit Kevlar-Membran
- 6"
- Cinch
- Klinke (6.3mm)
- XLR
Aktiver AMT-Studiomonitor
Hear the most subtle details.
The R80 features a custom 6.8-square-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R80’s transparent and highly accurate sound makes it ideal for use in both commercial and home recording studios as well as broadcast and post-production environments.
Superior transient response.
In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 uses an incredibly thin, folded Kapton® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.
Wide, consistent stereo image.
An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R80 reacts predictably and sounds consistent from room to room.
Transparent sound.
The R80 utilizes an 8-inch, custom-coated, woven Kevlar® low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifier—making the R series some of the most powerful monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.
Have it your way.
You can customize the R80 in several ways. It’s available with black or blue faceplates to fit your studio décor. With balanced XLR, balanced ¼” TRS, and unbalanced RCA line-level inputs, it’s easy to feed audio to your R80 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.
Features:
- hochauflösender 2-Weg-Studiomonitor mit ''Air Motion''-Bändchenhochtöner
- blaue Frontblende lässt sich je nach Geschmack gegen beiliegende schwarze Alternativblende tauschen
- 8''-Tieftöner mit Kevlar-Membran
- eigens entwickelter Hochtöner mit ultra-dünner Kapton-Membran (<0,01 mm)
- Hochtönerfläche: 4,4 cm2 (entspricht einer 3''-Kalotte)
- Übertragungsbereich: 40 Hz – 22 kHz
- Trennfrequenz: 2,6 kHz
- Eingangsempfindlichkeit stufenlos regelbar per Gain-Poti
- Höhenanpassung schaltbar (linear/+1 dB/+3 dB/+6 dB)
- schaltbares Hochpassfilter (linear/60 Hz/80 Hz/100 Hz)
- Acoustic-Space-Schalter zur Basskorrektur (linear/-1,5 dB/-3 dB/-6 dB)
- 100/50 Watt Class-D-Endstufen (LF/HF)
- Grenzschalldruckpegel: 107 dB @ 1 m
- Eingänge: XLR (symmetrisch), 6,3-mm-Klinke (symmetrisch), Cinch (unsymmetrisch)
- Eingangsimpedanz: 20 kΩ (symmetrisch), 10 kΩ (unsymmetrisch)
- geschirmt gegen HF-Einstreuungen
- Ein-/Ausschaltverzögerung, Ausgangsstrombegrenzer
- Überhitzungs-, Transienten- und Subsonic-Schutzschaltung
- energiesparender Auto-Standby-Modus – bei Bedarf deaktivierbar
- Gehäuse: vinylbeschichtetes MDF
- Maße: 24,1 x 30,9 x 37,9 cm
- Gewicht: 9,0 kg
- Inkl. schwarzer Alternativblende
Angaben zur Produktsicherheit
Fender Musical Instruments Corporation
311 Cessna Circle, CA 92879, USA
Responsible Person: Fender (EDC) B.V.
Transpolispark, Siriusdreef 17-27, Hoofddorp, 2132 WT, Niederlande
contactemea@fender.com
Fender Musical Instruments Corporation
311 Cessna Circle, CA 92879, USA
Responsible Person: Fender (EDC) B.V.
Transpolispark, Siriusdreef 17-27, Hoofddorp, 2132 WT, Niederlande
contactemea@fender.com